Custom Fencing Fabrication in Adelaide – Built in Our Own Workshop

Fence Fab Warehouse specialises in custom fabrication in Adelaide. Every gate, panel, post and frame we install is fabricated from raw materials in our own Salisbury Plains workshop. As a result, you get a completely custom product built specifically for your property, your style and your brief

This isn’t just a point of difference, it’s the foundation of everything we do. Our in-house fabrication capability means we’re not limited by what a supplier stocks, what sizes are available or what colours are on the shelf. If you can imagine it, we can build it.

Our Custom Fabrication Workshop in Adelaide

Our workshop at Salisbury Plains is equipped to cut, weld, bend, form and powder-coat aluminium and steel to any specification. We work with raw aluminium extrusions, steel tube, flat bar, sheet metal and a range of infill materials to produce fencing products that meet the exact requirements of each job.

Every component goes through our quality control process before it leaves the workshop – checking dimensions, weld quality, powder-coat finish and overall fit. When our installation team arrives on site, everything is ready to go.

What We Fabricate

• Aluminium slat fencing panels – any width, height or colour
• Aluminium vertical blade and tubular fencing
• Custom steel and ornamental fencing
• Sliding and swing driveway gates – any size
• Pedestrian gates – standard and custom designs
• Gate frames and hardware
• Privacy screens and louvre panels
• Balustrades – residential and commercial
• Fence posts and concrete piers
• Steel spear-top and heritage ornamental panels
• Under fence plinths and base rails
• Custom brackets, fixings and hardware

Made to Measure – Every Time

Off-the-shelf fencing products come in standard sizes. Properties don’t. Sloped blocks, awkward corners, heritage setback requirements, unusual gate widths, custom post spacings – these are everyday challenges that standard products simply can’t handle well.

Because we fabricate everything ourselves, every panel we make is cut to the exact dimensions required for your site. No cutting corners, no fudging measurements, no gaps at the bottom because a standard panel is 10mm too short. Just a fence that fits perfectly.

Materials We Work With

• Aluminium extrusions – lightweight, rust-free, powder-coated
• Steel tube and flat bar – galvanised and powder-coated
• Colorbond and Zincalume steel
• Composite timber-look cladding
• Hardwood and treated pine timber infill
• Concrete – for piers, footings and under fence plinths
• Stainless steel hardware and fixings

Powder Coating

All our aluminium and steel fabrication is finished with a high-quality powder coat. Powder coating is a dry finishing process that applies a durable, even coat of colour that bonds directly to the metal – far more durable than paint and resistant to UV fading, chipping, moisture and salt air.

We powder-coat in a wide range of Colorbond colours – from classic blacks and greys through to custom colours matched to your home’s palette. Bring us a paint chip or colour code and we’ll do our best to match it.

Supply Only or Supply & Install

Our fabrication capability means we can service both homeowners and trade customers. If you’re a builder, landscaper or owner-builder who wants to handle your own installation – we can fabricate to your specifications and supply direct from our workshop.

Or if you’d prefer a fully managed service – we handle everything from design and fabrication through to installation and site clean-up. One team, one invoice, one point of accountability.

• Supply only – fabricated to your specs, ready for pickup or delivery
• Supply and install – full project management from measure to completion
• Volume pricing for developers and multi-lot projects

Why Choose Fence Fab for Custom Fabrication?

• Adelaide owned and operated – we understand local conditions and requirements
• In-house workshop – no third-party suppliers, no delays, full quality control
• Experienced fabricators – skilled in aluminium, steel and mixed-material construction
• Every job made to measure – no standard sizes, no compromise on fit
• Licensed builder BLD 344397
• Residential, commercial and development projects
• Fast turnaround – typically 2–3 weeks from approved quote and deposit paid

Frequently Asked Questions

Can you fabricate from my own design or plans?

Yes – if you have architectural plans, a sketch or even just a photo of what you’re after, we can work from that. Our team will review your design, advise on any practical considerations and provide a quote based on your specifications.

What’s the lead time for custom fabrication?

Typically 2–3 weeks from design approval and deposit paid for standard residential jobs. More complex or large-scale commercial fabrication may take longer – we’ll give you an honest lead time when you get your quote.

Can you match an existing fence or gate style?

In most cases yes! Bring us photos or measurements of the existing fence or gate and we’ll fabricate a matching or complementary piece. This is particularly useful for extensions, repairs or replacements where you need new fencing to blend with what’s already there.

Do you deliver fabricated products?

Yes – we can deliver fabricated products to your site across all Adelaide metro suburbs. Delivery pricing depends on your location and the size of the order. Ask us when you get your quote.

Start Your Custom Fabrication Project

Whether you need one custom gate or fencing for an entire development, Fence Fab Warehouse has the workshop, the experience and the team to deliver. Get in touch for a free measure and quote and tell us what you’re looking to build.

📞 Call us: 0437 707 078
✉ Email: admin@fencefabwarehouse.com.au
Or use the Get a Quote form →